3″ ALL-FLO AIRSIDE KIT

Reference: GTCU 3ALLAIRKIT

Air valve body / housing
Air valve spool
Air valve gasket
Shuttle and shuttle plate
Air valve end plug
Lip seal for the air valve end plug
O-ring for the air valve end plug

3″ ALL-FLO WETSIDE KIT

Reference: GTCU 3ALLWETKIT

Diaphragms: 2 main diaphragms (plus back-up diaphragms if required by the specific pump configuration).
Valve Balls: 4 check balls used to control fluid flow.
Valve Seats: 4 seats that form the seal with the valve balls.
O-Rings: Valve seat O-rings and any necessary internal sealing O-rings.

3″ ALL-FLO PILOT VALVE KIT

Reference: GTCU 3ALLVALKIT

Pilot Sleeve
Inner Spacers (pilot sleeve)
End Spacers (pilot sleeve)
O-Rings (for the pilot sleeve and end spacers)
Lip Seal (for the diaphragm rod

2″ ALL-FLO PILOT VALVE KIT

Reference: GTCU 2ALLVALKIT

Pilot Sleeve
Inner Spacers (pilot sleeve)
End Spacers (pilot sleeve)
O-Rings (for the pilot sleeve and end spacers)
Lip Seal (for the diaphragm rod

2″ ALL-FLO AIRSIDE KIT

Reference: GTCU 2ALLAIRKIT

Air valve body / housing
Air valve spool
Air valve gasket
Shuttle and shuttle plate
Air valve end plug
Lip seal for the air valve end plug
O-ring for the air valve end plug

Electrical Isolation Padlockable Kit

Reference: GTCU MLOCKKIT

1 x Lockout shell case pen
1 x Red safety lockout padlocks [KD]
1 x Aluminium MCB lockout toggle
1 x MCB lockout pin out standard
1 x MCB lockout pin out wide

Wizzy Heads SC 15 TW Tool Kit

Reference: GTCU SCTOOLLKIT

1 x Box wrench 10mm
1 x Box wrench 17mm
1 x Box wrench 19mm
1 x Set of Allen keys
1 x 2″ Camlock Hose spanner

Wizzy Heads 150 hrs Service Kit

Reference: GTCU SER150KIT

For use with 360 Wizzy Heads:
3 x Bolt
1 x O-Ring (110471)
1 x O-Ring (110440)
1 x O-Ring (110415)
1 x Ball Bearing
3 x Bolts
1 x O-Ring (120262)
6 x Washers
3 x Bearing
1 x O-Ring (108779)

Wizzy Heads 250 hrs Service Kit

Reference: GTCU WIZSERKIT

For use with 180 wizzy heads:
4 x Bolts
2 x Locking Plates
5 x Bolts
1 x O-Ring (110471)
1 x O-Ring (110440)
2 x O-Ring (110425)
1 x O-Ring (109440)
2 x O-Ring (110422)

2″ ALL-FLO WETSIDE KIT

Reference: GTCU 3ALLWETKIT

Diaphragms: 2 main diaphragms (plus back-up diaphragms if required by the specific pump configuration).
Valve Balls: 4 check balls used to control fluid flow.
Valve Seats: 4 seats that form the seal with the valve balls.
O-Rings: Valve seat O-rings and any necessary internal sealing O-rings.

GTC Unit Starter Kit

Reference: GTCU UNISTARKIT

One year recommended stock of spares:
2 x EPDM Gasket
2 x FPM Gasket
4 x Safety pins for slings
24 x Camlock seals
24 x Camlock split pins
4 x Flange Gaskets
1 x Electrical Isolation Padlockable Kit
1 x Wizzy Heads Service Kit 150 hours
1 x Wizzy Heads Tool kit SC 15TW

GTCU Accesories Kit

Reference: GTCU ACCEPACK

2 x Double Vortex Skimmer – i.e. Stainless Steel
2 x Ladder Arm support (for roto heads) – i.e. Stainless Steel
2 x GTCU feed tubes – i.e. Stainless Steel
2 x Lateral extension arm (for roto head) – i.e. Stainless Steel
2 x Vertical pumps outlet flanges (c/w pressure gauge) – i.e. Regular Carbon steel, zinc coated
2 x Vertical pumps inlet flanges (regular steel) – i.e. Regular Carbon steel, zinc coated
2 x Ladder Arm support (for roto heads) – i.e. Stainless Steel
2 x Spreader longitudinal tubes – i.e. 2’’ Stainless Steel Tubes
2 x Bottom tank pipe fixation support c/w T-piece with camlocks – i.e. Stainless Steel
2 x Large Various fixation U-bolts (onto the tanks piping system) – i.e. Stainless Steel
4 x Medium-sized U-shaped mounting bracket, various models– i.e. Stainless Steel
4 x Small Various fixation U-bolts – i.e. Stainless Steel
2 x Spreader tubes c/w end cap – i.e. Stainless Steel
2 x Inverter connection 2” pipe c/w camlocks (at each end male/male) – i.e. Stainless Steel
2 x Inverter connection 2” pipe c/w camlocks (at each end female/female) – i.e. Stainless Steel
1 x GTCU step grating walk – i. e. Regular Carbon steel, zinc coated, c/w high viz plate – i.e. Regular Carbon steel, zinc coated
2 x Lamellar Diffuser (Suction/Left) – i.e. Stainless Steel
2 x Lamellar Diffuser (Discharge/Right) – i.e. Stainless Steel
2 x Large internal pump frames (housing for the 5x stages vertical pumps c/w motor) – i.e. Regular Carbon steel, zinc coated
1 x Medium External pump frame (housing 3’’ All-Flo transfer pumps) – i.e. Regular Carbon steel, zinc coated
2 x Small External pump frames (housing 2’’ All-Flo transfer pumps) – i.e. Regular Carbon steel, zinc coated
2 x Manometers Gauge DN 100
1 x Kit of 2’’ Pipe Connectors (extension arm built-up) – i.e. Stainless Steel
4 x Flange Gasket (i.e. cardboard)
2 x Large Wheels for Medium External pump frames
6 x Small Wheels for Small External pump frames